This driver works with MGCPlus devices with CP firmware version from 4.74.
WINDOWS Vista™, 7 or 8.x (32-Bit or 64-Bit) or 10 (32-Bit or 64-Bit)
DASYLab Version 10 to 13, 2016
C++ Runtime VC2010 SP 1: (Is checked during installation and installed if necessary)
Microsoft .NET Framework 4.6.1 (Is checked during installation and installed if necessary)
HBM Setup Assistent for parameterizing the measuring instruments.
Ethernet interfaces
USB interface to set up the IP address once