Scan rate may now be set within this driver, because it is not possible via MGCPlus Assistent.
IP adddress may be entered manually
Automatic search for devices while placing a module on the schematic max now be cwitched off via INI file entry "SuppressSearch".
The driver uses HBM Common API 3.1 now
The CATMAN Active X and the CATMAN Adapter are not used anymore.
The driver is implemented as an Addon, not using the driver toolkit. This allows for example different scan rates or more than one device driver.
The device settings are written into the device via the HBM Setup Wizard. The driver reads the settings (sampling rate, channel name, unit) from the MGCPlus
The MGCPlus to be used can now be selected from a list of all connected devices if the subnet mask permits this.
The manual input of the IP address is only necessary if the automatic search is not possible, see searching for devices